IEI Integration PPC-37xxA-N26 v1.10 - Manual (Page 42)

PPC-37xxA-N26 Panel PC
Page 26
3.6.5 mSATA/PCIe Mini Mode Selection
Jumper Label: MSATA_SW1
Jumper Type: 2-pin header
Jumper Settings: See Table 3-7
Jumper Location: See Figure 3-7
The jumper configures the PCIe Mini slot (M_PCIE1) to automatically detect mSATA
device or to force mSATA to be enabled.
Setting Description
Short 1-2 Auto-detect mSATA device (Default)
Off Enable mSATA
Table 3-7: mSATA/PCIe Mini Mode Selection Jumper Settings
Figure 3-7: mSATA/PCIe Mini Mode Selection Jumper Location
3.7 mSATA SSD Installation
The PPC-37xxA-N26 has one PCIe Mini slot on the solder side of the motherboard for
mSATA SSD installation. To install the mSATA SSD, follow the instructions below.
Step 1: Remove the back cover (Section
7
3.5 ).
Step 2: Remove the two hex nuts on the bottom panel (Figure 3-8).