Proface GP4600R - 12.1 Standard HMIs with Rear Mounting Options" - Manual (Page 12)

Overview
12
GP unit Package Contents
Note:
z
For information on the package contents for the rear mount model, refer to
Package Contents (see page 172).
Overview
Verify all items listed here are present in your package:
1
GP unit: 1
2 Installation gasket: 1 (attached to the GP unit)
3
Installation fasteners: 4 per set
4
DC power supply connector: 1 (only for DC type) *1
5
USB cable clamp Type A: 1 set (1 clip and 1 tie)
6
GP4000 Series Installation Guide: 1
7
Warning/Caution information: 1
This unit has been carefully packed with special attention to quality. However,
should you find anything damaged or missing, please contact your local distributor.
*1
You can use the DC power supply connector for GP-4200/4300/4400 series to
supply power to GP-4500/4600 series. However the reverse is not possible. You
cannot use the DC power supply connector for GP-4500/4600 series on GP-
4200/4300/4400 series.
Revision
You can identify the product revision from the product label on the GP unit. The
following diagram is a representation of Revision A. The product label indicates
Revision A with an asterisk (*) in the "A" position.
  
 
)RU
*36HULHV )RU
*36HULHV
REV * B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5