Removing the sd card – Proface GP4600R - 12.1 Standard HMIs with Rear Mounting Options" User Manual
Page 155
Advertising
GP4000 Series Hardware Manual
155
Removing the SD Card
Step
Action
1
Make sure the SD Card Access LED is off.
1
SD Card Access LED
2
Push down the tab on the SD Card cover, then pull open the cover.
1
Tab
3
Push the SD Card once to release, and pull out the card. After removing the
card, close the cover.
NOTE:
After using the SD Card, store the SD Card in its case or other safe
location.
(1)
(1)
Advertising
This manual is related to the following products: