Package contents, 1 package contents – Proface GP4600R - 12.1 Standard HMIs with Rear Mounting Options" User Manual
Page 172
172
7.1
Package Contents
Verify all items listed here are present in your package:
1
GP unit: 1
2
DC power supply connector: 1
*1
3
USB cable clamp Type A: 1 set (1 clip and 1 tie)
4
Installation gasket: 1 set (8 per set)
5
Installation fasteners: 2 per set (attached to the top and bottom surfaces of the GP unit)
6
Installation screws: 4 per set (attached to the top and bottom surfaces of the GP unit)
7
GP4000 Series Rear Mount Model Installation Guide: 1
8
Warning/Caution Information: 1
This unit has been carefully packed with special attention to quality. However,
should you find anything damaged or missing, please contact your local distributor.
*1
You can use the DC power supply connector for GP-4300/4400 series to supply
power to GP-4500/4600 series. However the reverse is not possible. You cannot
use the DC power supply connector for GP-4500/4600 series on GP-4300/4400
series.
Revision
You can identify the product revision from the product label on the GP unit. The
following diagram is a representation of Revision A. The product label indicates
Revision A with an asterisk (*) in the "A" position.
)RU
*36HULHV
)RU
*36HULHV
REV
*
B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5