Proface GP4600R - 12.1 Standard HMIs with Rear Mounting Options" User Manual
Page 41
GP4000 Series Hardware Manual
41
*1
Status LED operations are as shown below:
*2
SD Card Access LED operations are as shown below.
*3
Ethernet LED operations are as shown below.
F
SD Card Interface
Cover/Replacement Battery
Insertion Cover
For information on how to open the cover, and
insert or remove the SD Card, refer to SD Card
Insertion/Removal (see page 150).
For information on how to open the cover and
replace the battery, refer to Replacing the
Primary Battery (see page 168).
G
Serial Interface (COM2)
GP-4601T: RS-422/485 Serial Interface.
Connector: D-Sub 9 pin (plug) x 1.
GP-4603T: RS-485 (isolation) Serial Interface.
Connector: D-Sub 9 pin (socket) x 1.
H
Serial Interface (COM1)
RS-232C Serial Interface. Connector: D-Sub 9
pin (plug) x 1.
I
USB (Type A) Interface
Conforms to USB2.0 (Type A) x 1.
Power supply voltage: 5Vdc+/-5%.
Output Current: 500 mA or less.
Maximum communication distance: 5 m (16.4
ft).
Color
Indicator
Operation Mode
(Drawing)
Logic execution mode
(when logic is enabled)
Green
ON
Offline
–
In operation
RUN
Flashing
In operation
STOP
Orange
Flashing
Software starting up.
Red
ON
Power is turned ON.
Flashing
In operation
Major Error
LED fade
(Green)
ON
The GP unit’s "Backlight Control" is set to Standby Mode
and the screen has gone blank.
-
OFF
Power is turned OFF.
Color
Indicator
Description
Green (Active)
ON
The SD Card is inserted.
OFF
The SD Card is not inserted or is not
being accessed.
Color
Indicator
Description
Green (Active)
Flashing
Data transmission is occurring.
OFF
No data transmission.
Green (Link)
ON
Data transmission is available in
10BASE-T/100BASE-TX.
OFF
No connection or subsequent
transmission failure.
Part
Name
Description
Link
Active