Custom setup menu, Security setting menu – Watlow EZ-ZONE ST User Manual
Page 62
Watlow EZ-ZONE
®
ST
•
60
•
Chapter 6 Factory Page
Control Module • Factory Page
Display
Parameter Name
Description
Range
Default
Modbus
Relative Ad-
dress
CIP
Class
Instance
Attribute
hex (dec)
Pro DP
Index
Par
ID
RUI/
GTW
Mod-
bus
Data
Type
&
Read/
Write
[CUSt]
[FCty]
Custom Setup Menu
[`par]
[ Par]
Custom
Parameter 1 to 20
Select the parameters
that will appear in the
Home Page.
The Parameter 1 value
will appear in the
upper display of the
Home Page. It cannot
be changed with the
Up and Down Keys
in the Home Page.
The Parameter 2 value
will appear in the
lower display in the
Home Page. It can
be changed with the
Up and Down Keys,
if the parameter is a
writable one.
Scroll through the
other Home Page
parameters with the
Advance Key
‰
.
[nonE]
None (61)
[`l;st]
Limit Status (1668)
[`L;hy]
Limit Hysteresis (183)
[`Lh;S]
Limit High Set Point (182)
[`LL;S]
Limit Low Set Point (181)
[`CU;r]
Sensed Current (179)
[gSd1]
Guaranteed Soak Deviation
1 Value (1214)
[P;ACr]
Profile Action Request (109)
[P;Str]
Profile Start (79)
[idLE]
Idle Set Point (107)
[t;tUn]
TRU-TUNE+
®
Enable (205)
[`r;rt]
Ramp Rate (177)
[`C;hy]
Cool Hysteresis (170)
[`C;Pb]
Cool Proportional Band
(169)
[`h;hy]
Heat Hysteresis (167)
[`h;Pb]
Heat Proportional Band
(166)
[``db]
Dead Band (164)
[``td]
Time Derivative (163)
[``ti]
Time Integral (162)
[`C;Pr]
Cool Power (161)
[`h;Pr]
Heat Power (160)
[`C;M]
User Control Mode (159)
[`AUt]
Autotune (158)
[``op]
Open Loop Set Point (110)
[AC;SP]
Active Set Point (72)
[AC;pu]
Active Process Value (25)
[StPt]
Set Point (85)
CUSt]
Custom Menu (180)
[`A;hy]
Alarm Hysteresis (97)
[`A;hi]
Alarm High Set Point (78)
[`A;Lo]
Alarm Low Set Point (42)
[USr;r]
User Restore Set (1171)
[`C_F]
Display Units (156)
[`i;CA]
Input Calibration Offset
(154)
[`Pro]
Process (75)
See:
Home
Page
Instance 1
Map 1 Map 2
- - - - - - - -
- - - -
14005
uint
RWES
[`iid]
[ iid]
Custom (1 to 20)
Instance ID
Select the parameters
that will appear in the
Home Page.
1 to 2
- - - -
Instance 1
Map 1 Map 2
- - - - - - - -
- - - -
- - - - 14003
uint
RWES
[`LoC]
[FCty]
Security Setting Menu
[LoC;o]
[LoC.o]
Security Setting
Operations Page
Change the security
level of the Opera-
tions Page.
1 to 3
2
Instance 1
Map 1 Map 2
- - - - 1692
- - - -
- - - - 3002 - - - - uint
RWE
Note:
Some values will be rounded off to fit in the four-character display . Full values can be
read with another interface .
If there is only one instance of a menu, no submenus will appear .
R: Read
W: Write
E: EE-
PROM
S: User
Set