Renkus-Heinz IC32-R-II - Manual (Page 15)

Users Manual IC-R-II
15
PREP
ARA
TION
Saving Changes
Each loudspeaker’s Connect, Control and Supervise Properties window also has a Save button. Pressing the Save button will save the
change(s) to the project file and to the associated loudspeaker’s flash memory.. Note that although the changes are being sent to the
project file, the project file itself is not being saved.
The Network Manager
Most Iconyx IC-R-II and ICL-FR setup and installation problems are “network problems” and not Iconyx or RHAON problems. Your Iconyx
array was factory tested before it left our factory and barring shipping damage should be in perfect operating condition. The RHAON Net-
work Manager allows you to check the integrity of the Ethernet network before you actually link to the loudspeakers. It is accessed from the
File pull down menu and identifies network problems for you before you waste a lot of time checking out the loudspeaker.
In the example shown here the ICL-FR Left obviously has a network communications problem while the CF61 DBL and the VoiceBox are
suspect.
For more details on the Network Manager refer to page 67.