Renkus-Heinz IC32-R-II - Manual (Page 62)

Users Manual
IC-R-II
62
APPENDIX V: USING THIRD PARTY CONTROLLERS
Operating Iconyx IC-R-II Digitally Steerable Arrays with External
Controllers
IC-R-II digitally steerable arrays include a RS485 port for communication
to and from external third party control devices, such as those made by
Crestron. This allows these third party devices to control IC-R-II arrays
just as you control them from your computer., Functions that can be
controlled from these devices include system monitoring, preset selec-
tion, power and level control. The RHAON software contains a RS485
Manager module for enabling and disabling the RS485 control mode on
these arrays.
To open the RS485 Manager control window, select RS485 Manager
from the Help pull down menu in RHAON. See graphic.
When the RS485 Manager dialog window opens, click on Scan to scan
the Ethernett network for IC-R-II arrays. Then use the drop down arrow
to open a list of the arrays found on the network and select the array
you want to switch over to RS485 control mode.
To switch the selected array to RS485 mode, click on the Switch Device
to RS485 Mode button.. This will transfer control of the array from your
computer to the RS485 control device. .
Be aware that once switched, the RS485 device is now in control of the
array and not your computer. While some basic commands can still be
accomplished using your computer and RHAON, most commands and
system monitoring are now unavailable to your computer unless and
until the remote device transfers control back to your computer or you
use your computer to disable the RS485 mode on the array.
Note that in multi-module arrays, such as the IC16-R-II, IC24-R-II and
IC32-R-II all modules are now under control of the RS485 device.
Important Installation Instructions
It is important that the RHAON network be installed first and system
commissioning (EQ, beam steering, etc.) completed before the serial
RS485 line is connected to the devices.
WARNING: Connecting an RS485 network to your devices before
completing their setup in RHAON will result in anomalies in both
operation of your devices and how they appear in software.