Renkus-Heinz IC32-R-II User Manual

Page 50

Advertising
background image

APPENDIX I: Audio Evacuation & Life Safety Functions

Although not certified as a “Life Safety” system, RHAON has been designed to meet the stringent requirements of most Audio Evacuation /

Life Safety system specifications.

Since “Life Safety” requirements vary widely from country to country and from one locality to another, we strongly recommend you contact

your local authorities for an opinion before proposing a RHAON system for any Life Safety application. They know best what’s required in

your area to meet code requirements.

A summary of RHAON’s life safety features follows.

Redundant CobraNet Inputs

All RHAON Empowered amplifiers have a secondary Ethernet input that can be used to provide a “redundant” control and distribution sys-

tem. Such systems, of course, also require a redundant Ethernet system. Changeover to the secondary or redundant system is automatic

in the event the primary system fails.

Continuous Performance Monitoring

The performance of all RHAON Empowered Amplifiers and Loudspeakers is constantly monitored for faults and abnormalities.

Event Logging and Notification

Pre-selected events are recorded in a Log file for later review and analysis; may be automatically forwarded via e-mail to another location.

Fault Monitoring

An opto-isolated input monitors the integrity of an external wiring loop by detecting the presence of a “sense” voltage and reporting its

absence via the Ethernet network.

Fault Relay

An isolated relay uses external wiring to report any amplifier fault, the loss of the Ethernet carrier signal or the absence of a sense voltage

to associated monitoring equipment. Normally Open & Normally Closed contacts handle up to .5 Amp @ 28 Volts AC or DC. The detection

circuit functions either with or without the array being connected to a RHAON network. If the RHAON carrier is present when the array is

first turned on, it reports if the carrier signal is lost; if the carrier isn’t present when the array is turned on it won’t report unless the carrier

signal suddenly appears.

Users Manual

IC-R-II

50

Advertising
This manual is related to the following products: