Renkus-Heinz IC32-R-II - Manual (Page 18)

Users Manual IC-R-II
18
CONNECT
Properties Windows
The three operational modes of RHAON, Connect, Control and
Supervise all have their own unique Properties window (see
below). Notice that the vertical pane on the left side of each
window is identical.
The Connect, Control and Supervise tabs at the top of the
window allow you to switch between the three operating
modes without returning to the main window. You can also
open Properties files
for more than one loudspeaker at the same time qnd move
them around the work space.
The Connect Properties window gives you the ability to:
1. Select and connect the multiple inputs of Rhaon empowered
loudspeakers to the amplifier(s)
2. Select and send input signals to the CobraNet network
3. Select one of the CobraNet digital audio channels, if Co-
braNet’s multi channel digital audio capability is being used.
The Control Properties window provides setup and control fa-
cilities for the loudspeaker’s on board DSP. It includes controls
for the:
1. Compressor
2. 8-band parametric equalizer, hi & lo band roll off and shelv-
ing filters
3. Signal delay
4. Priority override controls.
The Supervise Properties window allows you to:
1. Monitor and test the status of each transducer’s driver
2. Check the status of the voltage detect circuit, the fault relay
and the Ethernet network.
Notice that each one of the array’s transducers is being
supervised.