Renkus-Heinz IC32-R-II - Manual (Page 60)

Users Manual
IC-R-II
60
APPENDIX IV: KEEPING YOUR RHAON PROGRAM UP-TO-DATE
Updating DSP Firmware
The latest 48 kHz DSP firmware files (.bin files) were installed in your array before it was shipped to you, unless you specifically requested
96 kHz files be installed.. These files contain the loudspeaker specific EQ, crossover and protection settings for the loudspeaker and are
updated from time to time as the firmware is improved.
If your system was set up to operate at 48 kHz and you want to run at 96 kHz, you will need to install the 96 kHz .bin files for your
loudspeaker(s).
If you are having problems with your system, we may ask you to update the .bin files as part of troubleshooting, To download the latest .bin
files, go to Check for Firmware under the Help pull down menu. See page 57. Be aware that .bin files names which start with RH4... are 48
kHz files; 96 kHz files start with RH9...
Important: When upgrading previous versions of the Microcontroller and DSP firmware to the latest version, it is critical that the
Microcontroller firmware be upgraded first.
Step 1: In RHAON, right-click on one of the loudspeaker listings in the directory tree view or on the loudspeaker’s icon in the main display
area and select “Update DSP Firmware…”. The pop up menus are the same ones we explored on page 58 under Updating Microcontroller
Firmware.
Selecting Update DSP Firmware will open the window shown below. Notice that the program lets you know what firmware is installed in the
loudspeaker.
Step 2: Select the appropriate firmware to download and press “Download”. If no listings appear in the white field, it’s a sign that you have
not downloaded any .bin files for that loudspeaker from the web and placed them in the DSP_Firmware folder.