Boot mode, Introduction, Overview – APC Battery Management System User Manual
Page 108: User’s guide, Battery management system
Advertising
®
USER’S GUIDE
Battery Management System
101
Boot Mode
Introduction
Overview
In addition to using a BOOTP server or manual settings, the Management
Card that the Battery Management System master controller contains can
use a dynamic host configuration protocol (DHCP) server to provide the
settings it needs to operate on a TCP/IP network.
To use a DHCP server to provide the Management Card’s network settings,
use
Boot mode
, a
TCP/IP
option in the
Network
menu.
Boot mode
must
be set to either
DHCP & BOOTP
, its default setting, or
DHCP only
.
See also
For information on DHCP and DHCP options, see
Advertising