APC Battery Management System - Manual (Page 16)

®
USER’S GUIDE
Battery Management System
9
Web interface
To access and log on to the Battery Management System’s Web interface:
1. In the URL Location field, do one of the following.
– If the Battery Management System port is set to the default value of
80, type http:// followed by the Battery Management System IP
address. The following example shows a typical IP address:
http://170.241.17.51
if HTTP is your access mode
https://170.241.17.51
if HTTPS (SSL/TLS) is your access
mode
– If the Battery Management System Web port is set to a value other
than the default of 80, enter the System IP address (the IP address
of the Battery Management System) followed by a colon and the
configured Web Port value (8000 in the following example):
http://170.241.17.51:8000
if HTTP is your access mode
https://170.241.17.51:8000
if HTTPS (SSL/TLS) is your
access mode
– If there is a DNS server entry for the Battery Management System,
you can enter the DNS name. For example:
http://DeviceNumber25
if HTTP is your access mode
https://DeviceNumber25
if HTTPS (SSL/TLS) is your access
mode
2. Respond to the User Name and Password prompts. The default
Administrator user name and password are both apc , all lowercase.
In the Web interface, data verification requires that you
enable JavaScript or Java.