APC Battery Management System - Manual (Page 171)

®
USER’S GUIDE
Battery Management System
164
3. Type open and the Battery Management System’s IP address, and
press E NTER . If the Port setting for FTP Server in the Network menu
has changed from its default value of 21 , you must use the non-default
value in the FTP command.
a. For some FTP clients, use a colon to add the port number to the end
of the IP address.
b. For Windows FTP clients, separate the port number from the IP
address by a space. For example, if the Battery Management
System Management Card’s
FTP Server Port setting has been
changed from its default of 21 , such as to 21000 , you would use the
following command for a Windows FTP client transferring a file to a
Battery Management System Management Card with an IP address
of 150.250.6.10.
ftp>
open 150.250.6.10 21000
4. Log on using the Administrator user name and password. ( apc is the
default for both.)
5. Upgrade the AOS. For example:
ftp>
bin
ftp>
put apc_hw02_aos_264.bin
6. When FTP confirms the transfer, type quit to close the session.
7. Repeat step 2 through step 6 for the application module. In step 5 , use
the application module file instead of the AOS module.