APC Battery Management System - Manual (Page 25)

®
USER’S GUIDE
Battery Management System
18
Information displayed in the control console only.
The main screen of
the control console displays the following additional information.
• Version information : (In the Web interface, select About System
from the Help menu.)
– Battery Manager III APP : The version of the application (APP).
– Network Management Card AOS: The version of the APC
operating system (AOS) of the master unit’s built-in management
card.
• Status : The status of the master unit’s built-in Management Card.
The status codes are displayed in the control console only.
P+ The APC operating system (AOS) is functioning properly.
N+ The network is functioning properly.
A+ The application firmware is functioning properly.
A- The application firmware has a bad checksum.
A? The application firmware is initializing.
A! The application firmware is not compatible with the AOS.
If you can access the control console through Telnet, the
AOS reports P+, and the network reports N+.