Spanning-tree – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 117
Brocade Mobility RFS7000-GR Controller CLI Reference Guide
103
53-1001945-01
show
2
spanning-tree
Privilege / Global Config
Use this command to display spanning tree information.
Syntax
show spanning-tree (mst)[config|detail|instance]
Parameters
Example
RFS7000(config)#show spanning-tree mst detail
% Bridge up - Spanning Tree Enabled
% CIST Root Path Cost 0 - CIST Root Port 0 - CIST Bridge Priority 32768
% Forward Delay 15 - Hello Time 2 - Max Age 20 - Max-hops 20
% 1: CIST Root Id 8000000000000000
.................................................................................
.................................................................................
.................................................................................
% ge1: no root guard configured - Current root guard off
% ge1: Configured Link Type point-to-point - Current shared
%
RFS7000(config)#
RFS7000(config)#show spanning-tree mst instance
% Bridge up - Spanning Tree Enabled
% CIST Root Path Cost 0 - CIST Root Port 0 - CIST Bridge Priority 32768
.................................................................................
.................................................................................
.................................................................................
% ge1: Port 2001 - Id 87d1 - Role Disabled - State Discarding
% ge1: Designated External Path Cost 0 -Internal Path Cost 0
% ge1: Configured Path Cost 20000000 - Add type Explicit ref count 1
% ge1: Designated Port Id 0 - CST Priority 128 -
% ge1: CIST Root 0000000000000000
% ge1: Regional Root 0000000000000000
% ge1: Designated Bridge 0000000000000000
% ge1: Message Age 0 - Max Age 0
% ge1: CIST Hello Time 0 - Forward Delay 0
% ge1: CIST Forward Timer 0 - Msg Age Timer 0 - Hello Timer 0
% ge1: Version Multiple Spanning Tree Protocol - Received None - Send STP
% ge1: No portfast configured - Current portfast off
% ge1: portfast bpdu-guard default - Current portfast bpdu-guard off
% ge1: portfast bpdu-filter default - Current portfast bpdu-filter on
% ge1: no root guard configured - Current root guard off
% ge1: Configured Link Type point-to-point - Current shared
%
RFS7000(config)#
mst
Displays MST information.
•
config – Displays configuration information.
•
detail – Displays detailed information.
•
instance – Displays instance information.