Extended acl instance, In this chapter, Extended acl config commands – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 365: 14 extended acl instance, Chapter 14, “extended acl instance, Chapter
Brocade Mobility RFS7000-GR CLI Reference Guide
351
53-1001945-01
Chapter
14
Extended ACL Instance
In this chapter
•
Extended ACL Config Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 351
Use the(config-ext-nacl) instance to configure ip access-list extended ACLs.
Extended ACL Config Commands
The following table summarizes the config-ext-nacl commands.
TABLE 10
Extended ACL config commands
Command
Description
Ref.
Clears the display screen.
Specifies packets to reject.
Ends the current mode and changes to the EXEC mode.
Ends the current mode and moves back to the previous mode.
Displays the interactive help system.
Specifies packets to mark.
Negates a command or set default values.
Specifies packets to forward.
Service commands.
Shows running system information.