Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 423)

Brocade Mobility RFS7000-GR CLI Reference Guide 409
53-1001945-01
DHCP Config Commands
17
no
config-dhcp-class
Use this command to negate a value or set its default value.
Syntax
no [multiple-user-class|option (user-class) <WORD>]
Parameters
The
no
command negates any command associated with it. Wherever required, use the same
parameters associated with the command getting negated.
Example
FS7000(config-dhcpclass)# no multiple-user-class
RFS7000(config-dhcpclass)#