Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 501)

Brocade Mobility RFS7000-GR Controller CLI Reference Guide 487
53-1001945-01
Wireless Configuration Commands
20
adopt-unconf-radio
Wireless Configuration Commands
Use this command to adopt a radio (even if not yet configured). The default template is used for
configuration.
Syntax
adopt-unconf-radio
Parameters
Example
RFS7000(config-wireless)#adopt-unconf-radio enable
RFS7000(config-wireless)#
enable Enables the adoption of unconfigured radios.