Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 303)

Brocade Mobility RFS7000-GR Controller CLI Reference Guide 289
53-1001945-01
Crypto Map Config Commands
10
set
Crypto Map Config Commands
Use this command to set the various set parameters of the peer device.
Syntax
set (localid|mode|peer|pfs|remote-type[ipsec-l2tp|xauth]|
security-association|session-key|transformset)
set localid(dn|hostname)
set mode[aggressive|main]
set peer <A.B.C.D> <WORD>
set security-association
(level(perhost)|lifetime(kilobytes|seconds) <value>)
set session-key (inbound|outbound)(ah|esp)
set session-key (inbound|outbound) ah <SPI>
set session-key (inbound|outbound) esp <SPI> cipher <SPI> authenticator <SPI>