Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual

Page 67

Advertising
background image

Brocade Mobility RFS7000-GR Controller CLI Reference Guide

53

53-1001945-01

show

2

Parameters

access-group

Displays the ACLs attached to an interface.

•

WORD - Interface name

•

all - Display ACLs attached on all interfaces

•

ge - GigabitEthernet interface

•

me1 - FastEthernet interface

•

role - Role name

•

sa - StaticAggregate interface

•

vlan - VLAN

•

IFNAME – The interface name to which the ACL is associated. It lists the details
of ACLs configured on the particular Layer 3 or Layer 2 interface.

•

eth – The name of the Ethernet interface to which the ACL is associated.

•

vlan – The name of the VLAN interface to which the ACL is associated.

access-list

Lists IP access lists.

arp

Displays Address Resolution Protocol.

ddns

Displays DDNS configuration.

•

binding – DNS Address bindings.

dhcp

Displays the DHCP Server configuration.

•

binding – DNS Address bindings.

•

class – Configure DHCP Server class.

•

pool – DHCP pools.

•

sharednetwork – Shared Network.

dhcp-vendor-options

DHCP Option 43 parameters received from DHCP server.

domain-name

Default domain for DNS.

dos

Denial of Service configuration

http

Hyper Text Transfer Protocol.

•

secure-server – Secure HTTP server.

•

server – HTTP server.

igmp

Internet Group Management Protocol (IGMP)

interface

IP interface status and configuration.

•

IFNAME – Interface name.

•

brief – Brief summary of IP status and configuration.

•

ge – GigabitEthernet interface.

•

me1 – FastEthernet interface.

•

sa – StaticAggregate interface.

•

vlan – VLAN interface.

name-server

DNS nameservers.

ip nat
[interfaces|translations]

ip nat (translation)
[inside|outside|verbose]
[destination|source]

Network Address Translation (NAT).

•

interfaces – NAT Configuration on Interfaces.

•

translations – NAT translations.

•

inside|outside|verbose (destination|source).

route

IP routing table.

•

A.B.C.D – Displays the network in the IP routing table.

•

A.B.C.D/M – IP prefix <network>/<length>, e.g., 35.0.0.0/8.

•

detail – IP routing table in detail.

Advertising