Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 467)

Brocade Mobility Access Point System Reference Guide 457
53-1003100-01
6
The name of the radio QoS policy, for which the admission control settings apply, displays in the
banner of the QoS Policy screen.
FIGURE 28 Radio QoS Policy screen - Admission Control tab
10. Select the Enable admission control for firewall detected traffic (e.g, SIP) option to apply radio
QoS settings to traffic detected by the access point’s firewall. This feature is enabled by
default.
11. Select the Implicit TPSEC option to require wireless clients to send their traffic specifications to
the access point before they can transmit or receive data. This feature is enabled by default.
12. Set the following Voice Access admission control settings for the radio QoS policy:
Enable Voice Select this option to enable admission control for voice traffic. Only voice traffic admission control is
enabled, not any of the other access categories (each access category must be separately enabled
and configured). This feature is disabled by default.