Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 684)

674 Brocade Mobility Access Point System Reference Guide
53-1003100-01
12
Select Load Image to start loading the captive portal pages image file.
Optionally, refer to the Load Image Status field to view the status of the current upload.
Select Status tab. The following screen displays:
FIGURE 37 Devices Captive Portal Pages - Status screen
Hostname If needed, specify a hostname of the server transferring the file. This option is not
valid for cf, usb1, usb2, usb3 and usb4. If a hostname is provided, an IP Address is
not needed.
This field is only available when Server is selected in the From field.
Path/File If Advanced is selected, define the path to the file on the server. Enter the complete
relative path to the file.
User Name If Advanced is selected, provide a user name to access a FTP or SFTP server.
This parameter is required only when the selected protocol is ftp or sftp.
Password If Advanced is selected, provide a password to access the FTP or SFTP server.
This parameter is required only when the selected protocol is ftp or sftp.