Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 730)

720 Brocade Mobility Access Point System Reference Guide
53-1003100-01
13
FIGURE 15 RF Domain - Radio Status screen
The Radio Status screen displays the following:
Radio Displays the name assigned to each listed RF Domain member access point radio. Each name
displays as a link that can be selected to display radio information in greater detail.
Radio MAC Displays the MAC address as a numerical value factory hardcoded to each listed RF Domain
member access point radio.
Radio Type Defines whether the radio is operating within the 2.4 or 5 GHz radio band.
Access Point Displays the user assigned name of the RF Domain member access point to which the radio
resides. Brocade Mobility 7131 Access PointN models can have from 1-3 radios depending on
the SKU. AP1220, AP71xx, AP1240 and models have two radios, while Brocade Mobility 6511
Access Point have 1 radio.
AP Type Lists the model type of each RF Domain member access point.
State Displays the radio’s current operational state.
Channel Current
(Config) Displays the current channel each listed RF Domain member access point radio is broadcasting
on.
Configured Channel Lists each radio’s defined operating channel to help assess if the radio is no longer
transmitting on its configured channel. Neighbor radios are often required to assist
non-functioning peers in the same coverage area.
Power Current
(Config) Displays the current power level the radio is using for its transmissions.
Configured Power Lists each radio’s defined transmit power to help assess if the radio is no longer transmitting
using its assigned power. Neighbor radios are often required to increase power to compensate
for failed peer radios in the same coverage area.
Clients Displays the number of clients currently connected to each listed RF Domain member access
point radio. AP1220, AP71xx, AP1240 models can support up to 256 clients per radio. Brocade
Mobility 6511 Access Point can support up to 128 clients per radio.
Refresh Select the Refresh button to update the statistics counters to their latest values.