Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 695)

Brocade Mobility Access Point System Reference Guide 685
53-1003100-01
12
FIGURE 44 Certificate Management - Import New RSA Key screen
5. Define the following configuration parameters required for the import of the RSA key:
Key Name Enter the 32 character maximum name assigned to identify the RSA key.
Key Passphrase Define the key used by the server (or repository) of the target RSA key. Select the Show
textbox to expose the actual characters used in the passphrase. Leaving the option
unselected displays the passphrase as a series of asterisks “*”.
URL Provide the complete URL to the location of the RSA key. If needed, select Advanced to
expand the dialog to display network address information to the location of the target key.
The number of additional fields that populate the screen is dependent on the selected
protocol.
Protocol Select the protocol used for importing the target key. Available options include:
•
tftp
•
ftp
•
sftp
•
http
•
cf
•
usb1
•
usb2
•
usb3
•
usb4
Port Use the spinner control to set the port. This option is not valid for cf and usb1-4.
IP Address Enter IP address of the server used to import the RSA key. This option is not valid for cf
and usb1-4.
Hostname Provide the hostname of the server used to import the RSA key. This option is not valid for
cf and usb1-4.