Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 561)

Brocade Mobility Access Point System Reference Guide 551
53-1003100-01
8
Click Ok to save changes. Click Reset to revert all changes made to this screen.
Click Exit to close the Client Identity screen.
From the main menu on the left, select Client Identity Group item. The following screens displays:
FIGURE 12 Security - Device Fingerprinting - Client Identity Group
Client Identity Group is a collection of Client Identities. Each client identity included in a client
identity group is set a priority value that indicates the priority for that identity when device
fingerprinting.
Match Type Use the drop-down menu to select how the signatures are matched. The available options
are:
•
Exact – The complete signature string completely matches the string specified in the
Option Value field.
•
starts-with – The signature is checked if it starts with the string specified in the
Option Value field.
•
Contains – The signature is checked if it contains a particular string specified in the
Option Value field.
Value Format Use the drop-down menu to select the format of the value that is being checked. The value
can be either ASCII or Hexadecimal.
Option Value Use this text box to set the 64 character maximum DHCP option value to match.