Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 83)

Brocade Mobility Access Point System Reference Guide 73
53-1003100-01
5
FIGURE 10 Profile Adoption screen
5. Define the Preferred Group used as optimal group of Virtual Controller for adoption. The name
of the preferred group cannot exceed 64 characters.
6. Select the VLAN option to define a VLAN the access point’s associating Virtual Controller AP is
reachable on. VLANs 0 and 4,095 are reserved and cannot be used. This setting is disabled by
default.
Define the Hello Interval value in seconds.
The Hello interval is the interval between two consecutive hello keep alive messages exchanged
between the access point and the adopting wireless controller. These messages serve as a
connection validation mechanism to ensure the availability of the adopting wireless controller. Use
the spinner to set a value from 1 - 120 seconds.
Define the Adjacency Hold Time value. This value sets the time after which the preferred controller
group is considered down and unavailable to provide services. Use the spinner to set a value from
2 - 600 seconds.