Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 637)

Brocade Mobility Access Point System Reference Guide 627
53-1003100-01
10
• By default, SNMPv2 community strings on most devices are set to public for the read-only
community string and private for the read-write community string. Legacy Brocade devices may
use other community strings by default.
• Brocade recommends SNMPv3 be used for device management, as it provides both
encryption, and authentication.
• Enabling SNMP traps can provide alerts for isolated attacks at both small radio deployments or
distributed attacks occurring across multiple sites.