FallTech Shock-Absorbing Lanyards (SAL’s) - Manual (Page 24)

47
Web Loop Connections:
Many Shock-Absorbing Lanyards feature a Web Loop at the attachment end,
allowing the lanyard to be choked on to the back D-ring of your Full Body
Harness. This is a versatile connection which reduces the weight of the SAL and
in the case of systems utilizing an FBH having a web loop in the place of a D-
ring, this type of connection eliminates metallic components which may conduct
electricity when working near energized power transmission equipment. To
make a connection to your Full Body Harness with a Web-Loop SAL, see Figure
A-4 below:
Fig. A-4 – Making Web-Loop Connections
Step 1:
Pass web
loop through
back D-ring.
Step 2: Pass
Anchorage-End
Connector through
Web Loop.
Step 3: Pull SAL
through Web
Loop and choke
to D-ring.
48
Warranty
FallTech warrants to the buyer that all products are free from defect in
material and workmanship at the time of shipment. Obligation under this
warranty is limited to product replacement for the period of two (2) years
from the date of installation or use by the owner, provided that this period
shall not exceed two (2) years from the date of shipment. This warranty
is not transferable. No other person or firm is authorized to assume or
assign for FallTech any other warranty in connection with the sale or use
of this product.
Furthermore, this warranty is void if any product is changed or altered
in any way, or if the product is used in a manner other than for which it is
intended. This warranty only covers defects in material and
workmanship; it does not cover conditions resulting from normal wear
and tear, neglect abuse or accident.
Alexander Andrew, Inc. (dba FallTech)
1306 South Alameda Street
Compton, CA 90221
Toll Free: (800) 719-4619
Phone: (323) 752-0066
Fax: (323) 752-5613
www.falltech.com
MSAL01 ALX
Rev. 1
2/1/2012