Triton X-SCALE/X2 Configuration Manual - Manual (Page 164)

154
X-S
CALE
/ X2 C
ONFIGURATION
M
ANUAL
D
OWNLOAD
W
ORKING
K
EYS
D ESCRIPTION :
The MAC and PIN Working Keys must be loaded before the terminal can operate in a “live” mode.
When this function is selected, a call is placed to the processor and a request is made for the keys to be
downloaded. Upon receiving a valid request, the host (processor) will download the keys and several other
parameters (such as the surcharge amount, if applicable). Once downloaded, these parameters will remain in
the terminal, even if it is turned off.
Press <E NTER > on the keypad to start the download or <C ANCEL > to abort the request. If the Working
keys downloaded successfully, the following dialog box will appear:
Press <E NTER > on the keypad to return to the Key Management screen.
A
CCESS
I
NSTRUCTIONS
:
1. From the K EY M ANAGEMENT screen, select the D OWNLOAD W ORKING K EY option by pressing <2> on
the keypad.
The following dialog box will appear when the Download Working Keys option is selected::
* NOTE *
The Terminal ID and the Primary Number (modem) / Host
IP Address, Host Port Number, and the terminal’s Ethernet
Settings (TCP/IP) must be entered (as applicable) before
attempting to download the Working Keys.