Triton X-SCALE/X2 Configuration Manual - Manual (Page 59)

4 9
D
IAGNOSTICS
C
ONFIGURE
E
THERNET
S
ETTINGS
A CCESS I NSTRUCTIONS :
1. From the D
IAGNOSTICS
screen, select the M
ODEM
/E
THERNET
option by pressing <7> on the keypad.
2. From the M ODEM /E THERNET screen, select the C ONFIGURE E THERNET S ETTINGS option by pressing <6>
on the keypad.
The C
ONFIGURE
E
THERNET
S
ETTINGS
option allows the terminal operator to perform the following functions:
2. S UBNET M ASK . Along with the IP address, each port requires a
Subnet Mask address. This distinguishes other terminals on the
same Local Area Network (LAN) from terminals in other loca-
tions.
Change the Subnet Mask by pressing <2> on the keypad. Enter
the new address in the data entry dialog box. Press <E
NTER >.
1. IP A
DDRESS
. This address identifies the terminal as the source of
the data packets sent to and received from the host server.
Change the IP Address by pressing <1> on the keypad. Enter
the new IP Address in the data entry dialog box. Press <E
NTER >.