Introduction, Platforms affected, Hardware requirements – Triton X-SCALE/X2 Configuration Manual User Manual
Page 243: Software requirements, External dependencies, Introduction platforms affected, Ardware, Equirements, Oftware, Xternal
Introduction
This software release is for the UK Multi-Currency Dispensing project. These release notes
describe differences from the 1.8.6 UK software release for RL5000.
Platforms Affected
This release is for the following XScale families:
•
RL5000
Hardware Requirements
The following hardware is supported by this release:
•
10.4” Display
•
MagTek Intellistripe 65 Card Reader
•
NMD 50 Dispenser
•
SPED Firmware Version SP-06
•
Modem and TCP/IP Communications
Software Requirements
The following load files are included with this release:
•
xd05xukx2.1.2.tlf – Full Load File UK Multi-Currency with EMV for 10.4" display
External Dependencies
The following are external dependencies for this release:
•
Triton Connect 4.4.0 is required to receive multi currency information from the ATM.
•
Host processor support of Triton Standard Communications Protocol version 5.30 or
later.
Software Release Notes
Triton Systems
Page 3 of 15
October 19, 2007