Triton X-SCALE/X2 Configuration Manual - Manual (Page 265)

Triton Systems of Delaware, Inc. Page 10 of 13
November 9, 2006
PAN Suppression in Journal Records
The middle PAN digits are no longer stored in the Journal. These digits are changed to ‘=’
(0x3D) before written to the journal files.
Do Not Call TC if Phone Number is Space Filled
Previous software releases would attempt to dial out to a host or Triton Connect phone number,
even if that phone number was filled with just spaces (not a valid phone number). This would
result in failed calls. This release fixes this behavior by skipping any phone number that
contains just spaces.
Auto Printer Reset after Loading Paper
This release does not require the terminal owner to go into diagnostics and reset the printer when
reloading paper. If the terminal is configured to be in service with printer errors and an out of
paper event occurs, the terminal will reset the printer automatically when paper is reloaded.
Changing Default Passwords
A new ERROR code (246) has been created to indicate the terminal’s Master Password is in its
default state. The terminal will detect this condition and go out of service. On the out of service
screen no error information will be displayed. The following is a screen capture of this state:
This error code will not clear until the Master Password is changed from it’s default state.