Triton X-SCALE/X2 Configuration Manual - Manual (Page 200)

Software Release Notes
Triton Systems Page 9 of 16 January 10, 2007
*Management Functions for Configuring the Ethernet Settings
The following is the dialog box that is used to configure the Outgoing Port address.
A setting of 0 allows the terminal to operate in a mode that is compatible with the 1.7.0.11 or
prior releases. Any other values will force the out going port address to equal this setting.
Power Failure During Dispense
Changes have been made to how the terminal logs a power failure that occurs during a dispense
operation. Previous releases would log the transaction record with a dispensed amount of zero
and no reversal. This has been changed to the following if a power failure occurs at this time: