Triton X-SCALE/X2 Configuration Manual - Manual (Page 182)

B-2
X-S
CALE
/ X2 C
ONFIGURATION
M
ANUAL
0 No errors
32 Good operation
33 Feed Failure
33 Note jammed between DDM and Exit sensor
34 Mis-tracked note at feed
35 Mis tracked note at double detect.
36 Mistracked note at exit.
37 Too long at exit.
38 Blocked exit
39 Too many notes
42 Transport error.
44 Bad Roller Profile
45 Diverter error
46 Exit quantified
47 Note missing at double detect
48 Reject rate exceeded.
49 Jam at exit
50 Interference recovery
51 Accountancy error
52 RAM error
53 EPROM error
54 Operation time-out
55 RAM corruption
56 Link error
76 Communications error with EJ
95 Multiple cassettes of the same type installed
96 Extension Cable Error
97 Extension exit trailing edge timeout
98 Extension exit timeout
99 Extension Skew detected
100 Good operation
100 Trailing edge time-out at extension entrance
101 2-second timeout waiting for pick. (Feed failure).
102 Timeout at Exit Sensor
104 Unable to clear width sensor.
105 Insufficient notes to learn from
106 FIFO error
107 Time out waiting for FIFO
108 Unexpected note at double detect, width sensor did not detect
note
109 Time-out at Exit sensor
110 Trailing edge time-out at exit.
111 Diverter timeout
112 Timeout waiting for leading edge at reject
113 Timeout waiting for trailing edge at reject
114 Exit blocked during purge
115 Diverter timeout on purge
Error Code Description