HT instruments FULLTEST3 - Manual (Page 10)

FULLTEST 3
EN - 9
3. PREPARATION FOR USE
3.1. PRELIMINARY CHECKS
This instrument was checked both mechanically and electrically prior to shipment. All possible cares and
precautions were taken to let you receive the instrument under perfect conditions. Notwithstanding we
suggest you to check it rapidly (possible damages may have occurred during transport – if so please
contact the local distributor from whom you purchased the item).
Make sure all standard accessories according to Packing List are included.
Should you have to return back the instrument for any reason please follow the instructions mentioned
in paragraph “TRANSPORT AND STORAGE”.
3.2. POWER SUPPLY
Earthed plugs must energize the instrument. To avoid any risk the instrument does not allow to effect
measurements when there is not such a connection (refer to paragraph “TURNING ON THE TESTER”
for details).
3.3. CALIBRATION
The instrument complies with the technical specifications contained in this manual and such a
compliance is guaranteed for 1 year. Annual recalibration is recommended.
3.4. TRANSPORT AND STORAGE
Please keep the original packaging for potential later transport, e.g. for calibration. Any transport
damage due to faulty packaging will be excluded from warranty claims.
Instruments must be stored in dry and closed areas. In case of an instrument being transported in
extreme temperatures, a recovery time of minimum 2 hours is required prior to instrument operation.