HT instruments FULLTEST3 - Manual (Page 74)

FULLTEST 3
EN - 73
Figure 65 : ADD CUSTOMER menu
- Create new customer’s name. Use the 123 / ABC key to select figure or character selection
screen.
- Confirm entered name by pressing the ENTER touch-screen key, SAVE – SELECT
CUSTOMER screen will appear again and last entered operator will be selected.
Press the ENTER touch-screen key to confirm selected customer, SAVE menu will be offered
again.
Repeat the operation for the other two levels and for comment if needed following the same
procedure. In case of entering new LOCATION or MACHINE, previously selected name will be
offered.
Once all data (customer, location, machine and comment) are entered/selected press the SAVE
hard key again to confirm started save operation. A beep-beep sound will follow as a confirmation
save operation has successfully been accomplished. Measurement screen will be offered again.
CAUTION
 LEVEL 1 (e.g. CUSTOMER) must obligatory be entered when saving test result
while LEVEL 2 (e.g. LOCATION), LEVEL 3 (e.g. MACHINE) and COMMENT are
not required.
 Levels shall be selected/entered in order from the top (LEVEL 1) to the bottom
(COMMENT). Do not skip empty level.