HT instruments FULLTEST3 - Manual (Page 73)

FULLTEST 3
EN - 72
8. MEMORIZING EXAMPLE
In order to save measurement result to a particular storage address, follow the next steps:
1) Carry out the measurement.
2) Press the SAVE hard key, the following display will appear (example):
SAVE
CUSTOMER
COMPANY A
LOCATION
ROMA
MACHINE
No
PLASTIC INJECTION MACHINE
003 DEVICE SERVICED
COMMENT
Figure 63 : SAVE menu
3) Confirm the save operation by pressing the SAVE hard key again if offered address (CUSTOMER,
LOCATION and MACHINE) as well as COMMENT are OK. If offered address or comment is not
OK then modify them as follows:
- Press the level key you wish to modify for example CUSTOMER, the following modification
display will appear (example):
Figure 64 : SAVE - SELECT CUSTOMER menu
- Check the list of available customers by using the ▼ and ▲ touch-screen keys (if there are
more than 4 customers entered).
- Select wished customer by pressing the customer’s touch-screen key, e.g. CUSTOMER 4.
- Press the ENTER touch-screen key to confirm the selection and to exit the SAVE – SELECT
CUSTOMER menu, SAVE menu will be displayed again.
How to add a new customer:
- Press the ADD NEW touch-screen key, the following display will appear.