HT instruments FULLTEST3 - Manual (Page 11)

FULLTEST 3
EN - 10
4. OPERATING INSTRUCTIONS
4.1. INSTRUMENT - DESCRIPTION
Figure 2: Instrument description
LEGEND
1 Quick instruction label under the cover.
2 Fuse F3, type T12.5A/500V 6.3×32 mm which protects internal circuitry in LOOP, R A and RCD
measurements.
3 General tester fuse F2, type T16A/250V 5×20 mm which protects internal circuitry in POWER, R PE
and DIELECTRIC measurements.
4 General tester fuse F1, type T16A/250V 5×20 mm which protects internal circuitry in POWER, R PE
and DIELECTRIC measurements.
5 ON/OFF mains switch (with red pilot lamp) .