In-Situ Win-Situ 2000 Operators Manual - Manual (Page 28)

24
0024690 rev. 002 09/00
IN THIS SECTION . . .
• About Water Quality Parameters
ABOUT WATER-QUALITY PARAMETERS
In-Situ’s Multi-Parameter TROLL 8000 can measure three water-quality
parameters in addition to pressure and temperature. The MP TROLL is
available in two versions
• pressure, temperature, pH, dissolved oxygen (DO), and conductivity
• pressure, temperature, pH, DO, and oxidation-reduction potential
(ORP)
If your software supports the MP TROLL, the Calibrate button is
available when a water-quality parameter is selected in the Navigation
tree. The calibration wizard will help you through the calibration
process.
7
WATER-QUALITY
PARAMETER
SETUP
Complete procedures for calibrating the Multi-Parameter TROLL
8000 for pH, conductivity, DO, and ORP are found in the MP
TROLL 8000 Operator’s Manual.