In-Situ Win-Situ 2000 Operators Manual - Manual (Page 29)

25
0024690 rev. 002 09/00
8
TEST SETUP
IN THIS SECTION . . .
• About Tests
• Adding a Test to a Device: The Test Wizard
ABOUT TESTS
Collecting a set of data is called “running a test.” Many things that you
do through Win-Situ can be visualized as actions performed on Tests.
For example,
• to give the device instructions for collecting data you add a test to
the device.
• when you want the device to end data collection you stop a test.
• to copy test data from the device to a host computer you extract
test data.
These actions are initiated by buttons in the Information pane when the
device’s Tests node (group view) or a Single test is selected in the
Navigation tree.
ADDING A TEST TO A DEVICE: THE TEST
WIZARD
1. Navigate to the device’s Tests node.
Advantages of the Tests node (group view): (1) the Add
Test action is available, and (2) operations can be performed
on multiple tests simultaneously.