KROHNE IFC 210 E-EEx EN - Manual (Page 41)

Part B IFC 210 Signal converter Sect. 5.5
05/2002 IFC 210 E 41
Messages= additional messages desired in measuring mode
•
No (no additional messages)
•
Yes (display additional messages, e.g. errors, in sequence with
measured values)
Select with
↑
or
↓
key.
Press
↵
key to change to subfunction “Trend”.
Trend = set graphic display (trend)
•
Mean values Show mean values over time base
•
Min. & Max. Min./Max. values over time base
•
Every value All values numbered consecutively
Select with
↑
or
↓
key.
Press
↵
key to transfer to subfunction “Updating“.
Updating = update measured values in the graphic display
(This selection not shown when “every value” selected, see above)
Selection:
• 0.1 sec. • 0.2 sec. • 0.5 sec. • 1 sec. • 2 sec.
• 5 sec. • 1 min. • 2 min. • 5 min.
Select with
↑
or
↓
key.
Press
↵
key to transfer to subfunction “Scaling“
Scaling = Set scaling of graphic display
Selection: • Auto • 0% ... 100% • -100% ... 0 % • -25% ... 100% • -100% ... 25%
• 0% ... 50% • - 50% ... 0% • 50% ...100% • -100% ... - 50%
Select with
↑
or
↓
key.
Press
↵
key to return to Fct. 1.04 Display
Please refer to Section 3.2 Factory settings