Thermo Fisher Scientific C101 Colorimeter User Manual
Page 32
Advertising
Measurement: Chlorine Dioxide
C103 Colorimeter
28
average the results. The result obtained should be approximately the
value of the standard used (please refer to instrument’s specifications for
data on meter precision and accuracy).
To re-calibrate the meter:
All instruments are factory calibrated and user
calibration is not recommended. However, if a Chlorine standard can be
prepared, measured accurately and qualified by a different method
(titration, for example) or another instrument of higher precision and
accuracy, then a Chlorine standard in the 4.1-5.0 ppm Cl
2
range can be
used. Please refer to Section 3.2 Chlorine, Free & Total, Chlorine Dioxide,
Bromine and Ozone, for details.
Advertising
This manual is related to the following products: