Thermo Fisher Scientific C101 Colorimeter User Manual
Page 6
Introduction
C401/301/201/101/102/103/104/105 Colorimeter
2
1.1
Unpacking C401/301/201/101/102/103/104/105 Colorimeter
and Accessories
The table below indicates the items that you should find in your
Colorimeter shipment.
Item
Qty C401 C301 C201 C101 C102 C103 C104 C105
1. Colorimeter
with
4
“AAA”
batteries
1
● ●
●
●
●
●
●
●
2. Instruction
Manual
1
●
●
●
●
●
●
●
●
3. Instrument
Carrying
Case
1
●
●
●
●
●
●
●
●
4. Empty
Vial
4
●
●
●
●
●
●
●
●
5. pH Indicator (Phenol Red)
Kit
1
●
●
●
6. Cyanuric Acid Reagent Kit
1
●
●
7. Chlorine, Free (DPD)
Reagent Kit
1
●
●
●
●
8. Chlorine,
Total
(DPD)
Reagent Kit
1
●
●
●
●
●
9. Chlorine Dioxide (Glycine)
Reagent Kit
1
●
Remove C401/301/201/101/102/103/104/105 Colorimeter from the
packing carton. Carefully inspect all items to ensure that no visible
damage has occurred during shipment. If the items you received do not
match your order, please contact your nearest distributor immediately.
WARNING: Extra care should be taken when unpacking, opening, and
handling the sample vials. Surface scratches or finger smudges on the vial
surface may cause measurement errors. Handle these items by their caps
only.
Batteries provided with the meter package are to be installed prior to use.
See Section 1.4 Battery Installation on page 5.
In the next page, Figure 1 depicts the meter. The three main components
of the instrument are the sample well, the display, and the keypad. The
following sections will describe the functionality of the display and the
keypad. The proper use of the instrument will be discussed in later
sections.