Thermo Fisher Scientific CyberScan PC 5000 - Manual (Page 115)

Instruction Manual CyberScan PC5500/ 5000
110
This option allows you to select the number of significant figures that
will be used when reporting you conductivity measurement. You have
the choice of one, two or three significant digits.
To set Significant Digits
1. Access the Set Significant Digits screen from the conductivity
Setup screen. The current Significant Digits are displayed on the
screen.
2. Touch
1, 2 or 3 to select the desired significant digits.
3. Touch
enter to accept the number of significant digits and return
to the Conductivity Setup screen.
OR
Touch
exit to return to the Conductivity Setup screen, without
making any changes.
To Set Display Configuration
This function will allow you to choose what information you would like
to be displayed on the Conductivity Measure screen, particularly the
information contained in the data box at the bottom of that screen.
The Conductivity Display Configuration is set the same way as
previously described in pH Setup.
To View Stored Data
This meter has memory capacity of up to 250 data points (1000 data
points for PCD5500). The View Stored Data screen allows you to sort
and look at specific data points. The stored data can be sorted by
sample identification number, date or operator identification number.
The Conductivity Stored Data is accessed the same way as
previously described in pH Setup.