Thermo Fisher Scientific CyberScan PC 5000 - Manual (Page 74)

Instruction Manual CyberScan PC5500/ 5000
69
This mode allows you to set the display resolution that you desire on
the screen. You have the choice of one, two or three decimal places.
To Set Display Resolution
1. Access the set display resolution screen from the pH Setup
screen. The current Display Resolution is displayed on the
screen.
2. Touch X.X, X.XX, X.XXX to select the desired resolution of the
display. This will be the format in which your measurement will be
displayed.
3. Touch enter to accept the resolution and return to the pH Setup
screen.
OR
Touch exit to return to the pH Setup screen, without making any
changes.
Remember, HELP is always just a touch of the button away.
pH channel 1
Example of X.X resolution
pH channel 1
Example of X.XX resolution
pH
channel 1
Example of X.XXX resolution