Thermo Fisher Scientific CyberScan PC 5000 User Manual
Page 124
Instruction Manual
CyberScan PC5500/ 5000
119
11 mV
OPERATION
This mode is used to measure oxidation/ reduction potential
(ORP/redox), perform titration and to verify the function of the meter.
The mV measure function allows you to continuously monitor the mV
potential of the electrodes in use. This can be done in either absolute
or relative mV.
In the millivolts mode, the current millivolts output from the electrodes
being used is monitored and displayed on the screen. The meter will
continually monitor the millivolts reading in this mode and will not lack
onto a single reading. However, once the reading has become stable,
a stable message will be displayed. Remember to setup your mV
measuring mode parameters. Refer to pages 76-81for mV setup
instructions.
Measure
Touch
for Relative mV reading
REL
REL
abs mV
channel 1
0.0
January 15, 2002 11:11am
ID# 00000
ATC 25.0°C