Thermo Fisher Scientific CyberScan PC 5000 - Manual (Page 33)

Instruction Manual CyberScan PC5500/ 5000
28
This selection screen allows you to choose the amount of information
that you want to have displayed on the screen. There are two levels
to choose from. Both of the levels provide identical results. The
amount of information appearing on the measure screens and the
number of setup parameters you can manipulate will vary from Basic
to Advanced procedural levels.
LEVEL1- Basic level
This level option offers a full set of prompts to guide you through the
basic operation of the meter. The information provided on the screen
is minimal to reduce clutter. It includes the measurement and the last
standardization time and buffer values. The data box at the bottom of
the measure screen includes the current date, time, sample
temperature and the electrode performance. In addition to the limited
information appearing on the measure screen, there are also fewer
options available to you in the setup screens of the various
measurement modes.
LEVEL 2- Advanced level
This option allows you to access to all of the features available on the
meter. A full set of prompts is available on virtually every screen to
lead you through the operation of the meter. You are also given
access to all setup parameters for the various measurement modes.
Any parameter not appearing on the basic level setup screens will
maintain the value previously set in the advanced level setup
screens. They will not automatically default to factory default settings.
This is ideal if you want to “lock” in a parameter in the Advanced
Level and switch to the Basic Level so others cannot accidentally
modify the parameters.
To Select Procedural Level
1. Access the select procedural level screen from the System Setup
screen. The current procedural level is displayed on the screen.
2. Use the numbered buttons on the right of the screen to select the
desired procedural level.
3. Touch enter to accept the procedural level and return to the
System Setup screen.
OR
Touch exit to return to the System Setup screen, without making
any changes.