Thermo Fisher Scientific CyberScan PC 5000 - Manual (Page 18)

Instruction Manual CyberScan PC5500/ 5000
13
The CyberScan PCD5500/ PC5500 are multi-channel meters. With
this meter you can switch from channel 1 to channel 2. You can also
view both channels at the same time by accessing the dual channel
mode. If you set the meter to view both channels, you cannot change
the parameters without choosing the screen that you want to modify.
The setup parameters for each screen independently of one another.
Choosing a channel
1. Touch anywhere on the standby screen.
OR
Touch channel on the main screen
THEN
2. Touch 1, 2 or dual to access the channel that you want to view.
To access System Setup from the standby screen
1. Touch anywhere on the standby screen.
2. Touch 1, 2 or dual to access the channel that you want to view.
3. Touch setup.
4. Touch
system on the setup screen.
If you are in any measure made, touch mode until you access the
main screen.