Thermo Fisher Scientific CyberScan PC 5000 - Manual (Page 6)

Instruction Manual CyberScan PC5500/ 5000
1
1 INTRODUCTION
1.1 Introducing the CyberScan Series
Thank you for selecting a Eutech Instruments CyberScan Bench
meter. This manual describes the operation of the CyberScan Series
5000 bench meter. The state-of-art meter that you have purchased is
easy to operate and will guide you through the various functions by
displaying easy to understand prompts. This instruction manual
should answer any questions that might arise in operating your meter,
however, do not hesitate to call our Technical Support at (65) 6778
6876 (ext 839) or fax at (65) 6773 0836.
This bench meter provides microprocessor precision in a compact
benchtop design that is easy to use. One touch screen controls all
procedures, letting you:
Measure pH, absolute mV, relative mV or Conductivity
Select one of three sets of standard buffer groups
Implement automatic buffer recognition
Standardize with up to five standard or customer buffers
Customise your display screen and +
operating parameters
Assign operator and sample identification numbers
Store 250 data points (1000 for PCD5500) in the meter’s
memory or transfer data to a computer or printer.
Access extensive online help with just a touch a button
It all adds up to rapid, completely automatic, intuitive operation.
You will find this symbol appearing in this manual; it indicates useful
tips that ease your meter operation.